Effect of Black Mold on Pregnancy

 

Black mold is often found in buildings that have issues with getting rid of moisture. It will grow on any material containing cellulose and also appears as a greenish-black color. It frequently grows outside as well on wood, dried up leaves, or other decaying materials. Black mold can grow on the following surfaces:

Natural carpet
Insulation
Wood
Wallpaper
Cotton
Ceiling Tiles
Paper
Drywall

Black Mold Exposure

This mold is a tricky one because it mostly begins releasing its spores after it becomes dried out. Once the wet slime that is the mold begins drying out the spores can begin to break away from the mass. They become released into the air and then are inhaled by the occupants of the building.

How Does it Affect Pregnancy?

There is no distinct evidence that proves that black mold causes pregnancy loss, but it is believed by many to be a causative factor. There are many reports that do support the idea that pregnancy loss in humans is possible due to mold exposure. Animal studies with mice have shown that mold toxins disrupt fetal development. Many of the mice in this study weren’t able to produce as large or healthy litters as they would have normally. If you are pregnant the best thing you can do is to make sure that your environment is as clean and mold-free as possible.

Testing for Black Mold

If you find mold make sure to have someone first put on protective gear including a face mask, gloves, and safety goggles. This will ensure that they don’t accidentally ingest the mold while inspecting it.

1. Get a few inches of scotch tape.
2. Hold the tape with the sticky side against the mold and gently press down.
3. Don’t fold the tape and stick it into a sandwich bag.
4. Write locations on each of the bags to keep track if there are differences in the mold.
5. Put all the baggies into a mailable envelope or bag.
6. Send the sample to a mold testing laboratory that you find online.

Wherever you send the mold will take some time to inspect it and then will call you with the results. If you find that you do have mold on your hands it is time to call professionals like Water Damage Zone to come in and completely remove the mold from your home. Risking your pregnancy by living in moldy conditions isn’t a smart thing to do. Make sure that you check all of your surrounding and limit your time in areas that may have mold in them.

 

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

5 Ways to Discover Hidden Leaks in Your Bathroom

 

Most of us aren’t new to the concept of a water leak in the bathroom. They happen all the time and sometimes when it’s really inconvenient for us. If you see any of these 5 signs, it may be time to call a professional to make some repairs.

 1. Appearance of Mold or Mildew

If you see mold or mildew in your bathroom it could mean that you have a hidden leak somewhere. Mold loves moist, dark areas to grow in and in order to find a starting point it will need a source of water. This is where your hidden bathroom leak comes in. Start looking at where the mold is forming and follow it to its area of highest concentration. You should be able to find a source of water at this point and need to now figure out how to repair it. Keep in mind that the longer you let this one go, the more mold you will have on your hands.

2. Warped or Stained Walls

You will notice walls that are warping or stained in the bathroom, this most likely means that you have a hidden leak on your hands. When drywall becomes too moist it will begin to bubble and warp. Over time it will continue to break apart until it falls apart into pieces. You may even notice your ceiling sagging and leaking with some of the water that built up in the area. In this case, professionals must remove all of the drywall and replace it.

3. Blistering Paint

If the paint in your bathroom appears to be blistering up from the wall, it is a telltale sign that water has leaked between the wall and the paint. This will separate the two from one another and cause the paint to rise up and fall off of the wall into pieces. The same thing will happen with wallpaper and you will need to replace the adhesive that you used to stick the paper to the wall.

4. Ruined Flooring

The flooring in your bathroom will buckle or crack. This shows you that the leak has been going on for long enough to soak into the floor. This can be particularly dangerous and must be repaired quickly before more damage is caused or someone gets hurt. You may notice that the floor feels soft like a sponge when you walk on it. This is because the water has soaked in and caused it to become unstable. Tiles will also become loose and you may notice staining on the floor as well. You will definitely need to call a professional to repair this issue.

5. Stained Ceilings

You may notice that the ceilings on the floor beneath your bathroom are becoming stained or damaged. Check in the room below the suspected bathroom leak to see if it is traveling down to the bottom floor. If you see a brown, copper, or other dark colored stain, it is a sign that you have a dangerous water leak in your ceiling. The ceiling may also begin to sag. Don’t wait to fix this! The moment you notice something like this you need to call professionals in to come and inspect the situation before it ends up causing more destruction and costing you more out of pocket.

Trust the Professionals

The certified professionals at Water Damage Zone understand that a water leak can be a dangerous and costly situation. That is why we are open 24/7 to respond to any type of water leak or water damage situation. Don’t hesitate to give us a call, our team will work quickly and around the clock to restore your home back to its original condition. We will fix your home the right way the first time, so you don’t have to waste any of your own precious time or risk injuring yourself.

 

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Mold Removal on Clothing and Shoes

 

Mold doesn’t just grow on materials in your home, it also grows on your clothing and shoes. This is one way that mold travels from one location to another. If you’re wondering how mold got into your home it is possible that you carried it inside on your own clothing. Mold is a fungus that thrives in places that are warm and moist so once it has been brought into such an area, it will thrive.

Removing Mold From Clothing

When looking at clothing that hasn‘t been used in a while keeping in mind that it is possible that mold can be removed. It is a smart idea to check any other clothing stored in the same area for mold growth because the spores can travel. Some of the following steps can be taken to remove the mold completely:
Place the moldy clothing in the washing machine and add ¾ of a cup of white vinegar. Repeat this as many times as necessary to completely remove the mold.
Take the mold clothes outside and brush the mold off before letting them sit in the sun. After a few hours, or the clothing has dried, take it inside and soak it in cold water. Afterward, wash it in hot water in the washing machine with detergent. Afterward, dry them all in the sun.
Buy mold remover or fungus remover and spray them onto the clothing in order to kill off the mold. It is also possible to buy a fogging product that you can use to fog the whole area where the moldy clothes were found. This will kill and prevent mold growth on your other clothing.

Removing Mold From Shoes

Shoes, especially leather ones, will allow mold to grow inside of them. One of the main causes is that people’s feet sweat and this sweat accumulates inside of shoes, allowing mold to begin to grow. Once you notice a foul smell or a sign of mold growth, it is time to begin treating your shoes for mold. The following methods have been found effective in removing mold from shoes:
Use a brush to remove any mold from the shoe. The brush will help to loosen and break up the mold by detaching it from the fabric of the shoe.
For shoes that can withstand this solution, mix one part water and one part alcohol. By wiping this onto your shoes with a cloth it will slowly start to destroy and eat away at the mold until it is all gone.
Always allow your shoes to fully dry after wearing them by placing them outside or somewhere that has decent airflow. You can also purchase products such as powders and silica gel packets that will prevent moisture from building up.

Checking the Area for Mold

When you discover mold on anything in your home it is important to check the area that those objects are located for mold growth. If you find mold growing on or inside your walls, in areas that you can’t reach, or in a large area that is impossible to treat on your own, then it is time to consult with the professionals. Water Damage Zone employs trained and experienced professionals that know how to eradicate mold growth quickly and at its root. Don’t hesitate to call when your mold problem has become too much for you to handle on your own. We can be there quickly to give you an affordable quote for your unique needs.

 

 

 

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Roof Leak leads to Roof Collapse

Water Damage Zone wishes to share this information with the community, we do not own any rights to this video.

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

How to Keep Your Home Well-Ventilated

Keeping a well-ventilated home should be on top of everyone’s priority list when it comes to household maintenance. Professional equipment comes in handy when helping to ventilate homes but the home also needs to have a flow of air going through it to carry debris and air pollution out of the home. In order to achieve proper air flow, there are several strategies we will go over in this article.

Old Homes Weren’t Ventilated

Many people note that older homes don’t contain proper ventilation that could move air in and out of the home. Older homes, lacking the insulation and proper sealing of newer homes, allowed air to more easily move in and out of the home. The building materials were also more porous, allowing air to even move through them. This didn’t solve all of the issues that a proper ventilation system would have but it certainly made it more tolerable than it is to live in a modern building without ventilation.

Not Having Ventilation is Bad

Not having a ventilation system is one of the worst things that you can do to yourself when it comes to a home. Think about it, all of the air in the home is stale and lingering. Any particles of debris, pollution, and even mold spores are lingering in the same space for months. When it hits the spring and summer months it becomes particularly difficult for air to move in and out of the house, creating worsened problems from mold and humidity.

Balanced Ventilation

A ventilation system that involves a balanced system is the best case scenario. This is because different fans bring air in and out of the home. By doing this it allows for the control of an entry point and exit point for the air entering and exiting the home. This is important because certain areas of the home will need more air than others. Having air delivered to the areas that are most used is important and also have air sucked out of rooms where moisture or other debris builds up. This will ensure a healthier quality of life and will prevent mold and other bacteria from getting out of control in your home.

Heat Recovery

Heat recovery is the best possible option to have when installing a ventilation system. What this does is it reduces the amount of humidity blown into the house. The way that it ensures this is that it changes the temperature of the air as it enters to match the air inside of the home. By doing this the heat recovery system will prevent moisture from building up in the home that will further exacerbate these issues.

Ventilate Your Home!

Home ventilation is one of the best things that you can invest in. It will enhance your quality of life and prevent your home from degrading because of moisture and mold. If you are unsure of where to begin, call the professionals at Water Damage Zone. We will be able to schedule a time to inspect your home and discuss the best possible options for where to install a ventilation system. We will help to ensure that you never have to deal with issues from mold and moisture in your home.

 

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Stop Mold From Ruining Your Home in the Summer

Mold spreads quickly in the summer because of the fact that it needs warm temperatures in order to successfully spread and find areas to grow. In order to prevent it from happening in the first place, the proper steps must be taken to discourage it from taking root. Although preventing mold can be time consuming, it will cost you far more in the long run if it takes hold.

Use the Air Conditioner

Mold will not grow if the air conditioner is on in your home because the humidity level will be too low for it to take hold. Make sure that the temperature remains below 77 degrees Fahrenheit. By keeping the temperature below this you will ensure that mold doesn’t begin to grow. Also, make sure to check air ducts and the air conditioner for any buildup of condensation. By keeping these areas dry, you will further prevent the possibility of mold spreading.

Close Windows on Rainy Days

While it may be nice and relaxing to leave your windows open on a rainy day, it is best to keep them shut. This will prevent moisture from coming into your home where it will cause surfaces to become wet. Once wet, these areas become the perfect breeding grounds for mold. Even after the water dries, if mold has begun to form it will continue to grow unless eradicated with mold killer.

Patch Up Leaks

If you start to notice leaks in your roof or other areas of the home, you need to patch them up immediately. The longer these areas go without repair, the harder it will be to eliminate any mold. Don’t forget to check for leaks in pipes in the home as well. In areas like the bathroom or basement, it is common to have leaking pipes that will cause moisture to build up inside of the walls. Usually, mold in these areas remains undetected for a long period of time before anyone realizes that it’s there. That’s why it’s important to check these spots regularly and repair any problems the minute you notice them.

Professional Help

Remember that if you’re in Los Angeles, Water Damage Zone is certified in mold removal and prevention. We will deal with any size mold problem and ensure that it never returns again. Trust our professionals to quickly do the job and keep your hands clean so you can get back to enjoying your life again.

 

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Mold FAQs

1. How do I clean electronic devices with mold in them? Some of my devices are impossible to clean on the inside.

The best thing to do in these cases is to clean the outside of the equipment and then vacuum any openings or holes to remove the mold spores. If this doesn’t seem to help then it’s time to buy a new device.

2. Can I keep any pictures that may have been exposed to mold spores?

Usually, you can keep these items. There are methods for cleaning photographs that you can look up to clean off any spores that may have come into contact with them. Documents on porous paper will need to be copied and then thrown away. Photo frames made out of wood or with porous material will need to be tossed and replaced as well.

3. Do I really need to clean everything inside of my home (storage containers, shower supplies, candles, souvenirs, dry food, etc.) or just the main things affected like clothing and furniture?

Everything must be hand cleaned individually to remove the most mold possible. Any objects in your home will have come into contact with the mold spores. Once this happens the spores grow on organic or porous materials and continue to spread through the home.

4. Can I reuse my vacuum after cleaning for mold?

Yes, you can continue using the vacuum you own but remember to replace the filter and clean the housing of the actual vacuum itself. This means wiping down the outside with mold killer and also cleaning out the inside of any removable parts with mold killer as well. This will ensure that your vacuum doesn’t become a breeding ground for mold and start to spread it as well.

5. Do I have to throw all my books away?

Books are a tricky thing when it comes to mold. Usually, if books are open and have encountered mold then they are now trash. Closed books can be vacuumed with a HEPA vacuum and should be ok to keep. Make sure that you don’t see any of the telltale signs of mold such as spottiness or moisture on the book’s pages. If you see any sign of mold, you will have to throw it out.

6. Do I try to clean the home myself or call a mold expert?

Small mold infestations can be safely handled on your own as long as you do your research and ensure that you know exactly what you are doing. You will need to know about different materials and how to check them for mold and also clean the mold off of them. Cleaning mold is one thing, but if it has infested your home to the point of being in the structure of the home, it’s time to call a professional.

 

Professionals like Water Damage Zone are certified in mold removal and will come to do an inspection of the home first in order to tell you everything that needs to be done. They will also quote you a price and give you an estimation for how long it will take to completely eradicate the mold from your home. If you have a serious mold problem on your hand, don’t hesitate before you give us a call.

 

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411