24/7 Water Extraction Services Now Serving Los Angeles County and Surrounding Cities

Water Damage Zone and Restoration Inc., is a full service Water Extraction, Water Damage Repair and Restoration Company providing 24/7 water extraction, water damage and flood cleanup emergency services to Los Angeles County and surrounding cities. 

Water Extraction and Water Damage Services for Los Angeles County Include:

* 24 Hour Emergency Service
* Residential Water Damage Loss
* Water Damage Mitigation and Restoration
* Basement Drying
* Crawl Space Damage Cleanup and Drying
* Flood Damage and Cleanup
* Water and Sewage Extraction
* Sewage Cleanup
* Mold Remediation
* Structural Drying
* Disinfection & Sanitization
* Pack-out/Pack-back Water Damage Repair
* Surface Area Drying
* Decontamination & Sanitation
* Disinfecting
* Dehumidification
* Damaged Carpet Removal
* Direct Billing to Insurance

Water Damage Zone and Restoration is Insured, Licensed and Bonded. Providing 24/7 emergency water damage, water extraction and flood cleanup services to Los Angeles County.

Call Water Damage Zone today (877) 520-1923  your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

  • 24/7 Emergency Response, Water Extraction, Water Damage
  • Direct Billing to Insurance, Locally Owned and Operated
  • Water Cleanup, Water Dry outs, Visual Mold Inspections, Sewage Damage Cleanup
  • Sterilizing & Odor Removal, Licensed & Bonded #963976, Reputable Los Angeles based company
  • Image from depositphotos, ID 15892692
  • Shutterstock Sequence Number: US-041C159DA-1

Water Damage Zone, Inc.

Corporate Office

15115 Califa St. Ste. C

Van Nuys, CA 91411

Mold Removal for a Healthy Home

Mold Removal for a Healthy Home…

Exposure to mold can cause cold-like symptoms, respiratory problems, nasal and sinus congestion, watery eyes, sore throat, coughing and skin irritations, and can trigger asthma attacks. Because some mold spores are very small and can easily be breathed deeply into the lungs, it is not safe to live in houses with high mold levels. Exposure to high mold spore levels can cause development of an allergy to mold. People can react to mold whether it is living or dead.

Everyone should minimize their exposure to mold. Children, the elderly, pregnant women and people with existing respiratory sensitivities are at higher risk for adverse health effects from mold. Some people are affected when exposed to very little mold, while others may show no adverse health symptoms when exposed to mold.

If you can smell a musty odor or see mold, you have a mold problem. Reliable sampling for mold can be expensive since it requires special equipment and training. Testing is not generally recommended as a first step.

Where to Look for Mold

Mold grows on organic materials, such as paper, dirt, wood and soap scum. Mold grows on moist materials, so mold growth is likely in areas wet by water leaks, flooding, humidity levels above about 70 percent and condensation. Any flooded area that was not completely dried within about one day is likely to have mold growth. Walls need to be opened and rapidly dried to prevent mold growth. Any area that is stained from water should be examined for mold growth. Peeling paint may be an indication of wet walls.

Moisture seeping through concrete walls and floors will cause moist conditions likely to cause mold growth on or in walls, carpeting and materials stored in the basement. Mold often grows under cabinets, behind base-boards, inside walls, in carpet padding and under vinyl wall coverings.

An unvented clothes dryer creates a very humid, warm environment conducive to mold growth. Closets may have mold growth if clothing is damp or if there is a cool outside wall in the closet. Also, there is a chance mold might be growing behind furniture, particularly against an outside wall.

Mold will not normally be found in furnace or air-conditioning ducts unless they were flooded because the heated or air-conditioned air is very dry.

Moisture coming through a basement floor or wall may deposit a light-colored salt and other minerals that are sometimes thought to be mold. The deposits should quickly dissolve and disappear when wet with water if they are a salt.

Mold Removal

Since people react to mold whether it is living or dead, the mold must be removed.

Take steps to protect your health during mold removal. Use a mask or respirator that will filter out mold spores. Usually it will be designated as an N95, 3M #1860 or TC-21C particulate respirator. Wear eye protection, rubber gloves and clothing that can be immediately laundered.

Dampen moldy materials before removal to minimize the number of airborne mold spores.

Mold can be removed from hard surfaces such as hard plastic, glass, metal and counter tops by scrubbing with a non-ammonia soap or detergent. (Do not mix ammonia and bleach; the fumes are toxic.)

It is impossible to completely remove mold from porous surfaces such as paper, Sheetrock (drywall) and carpet padding, so these materials should be removed and discarded.

Scrubbing may not completely remove mold growth on structural wood, such as wall studs, so it may need to be removed by sanding. Wear personal protective gear and isolate the work area from the rest of the home.

After the mold is removed, disinfect the area using a bleach and water solution or another disinfectant. The amount of bleach recommended per gallon of water varies considerably. A clean surface requires less bleach than a dirty surface. A solution of 1/4 cup to 1/2 cup bleach to 1 gallon of water should be adequate for clean surfaces. The surface must remain wet for about 15 minutes to allow the solution to disinfect. Concentrations as high as 1½ cups of bleach per gallon of water are recommended for wood and concrete surfaces that could not be thoroughly cleaned. Provide adequate ventilation during disinfecting and wear rubber gloves.

Finally, rinse the entire area with clean water, and then rapidly dry the surfaces. Use fans and dehumidifiers or natural ventilation that exchanges inside air with outside air

Preventing Mold Growth

The moisture problem must be fixed to prevent future mold growth. Since there are some mold spores everywhere and since mold grows on any wet organic surface, the only way to prevent mold growth is to keep things dry.

Air Cleaners

Air cleaners will not solve a mold problem. A high-efficiency air filter that removes mold spores may reduce the number of spores in the air, but mold spores rapidly settle onto surfaces, such as the floor, where air filters cannot remove them. Filters may reduce the number of mold spores in the air but are not substitutes for removing the mold. Air cleaners that produce ozone are not effective at eliminating mold. Ozone is a lung irritant that should not be in an occupied space.

Source: http://www.ag.ndsu.edu
Kenneth Hellevang, Ph.D., Engineer, NDSU Extension Service

Sewage Water Backup

shutterstock_85009870

Whether you own your home or you rent, there are few things that can occur in your home that are more traumatic and quite frankly horrible than a sewer water backup.  These not only possess the stress of water damage, but they also have added rankness of waste water that makes it a true double whammy.

So how does the sewer water backup occur?  They happen for many reasons.  You can have tree roots in your lines, an aging sewer system, combined and blocked pipes.  Whatever the cause, when it occurs, it is tough to deal with. How do tress affect the pipelines?  As your home ages and depending on the age of the home, the home can settle placing stress on the pipes.  These stresses can create cracks which seep water.  As trees and shrubs seek water sources, they can find their roots can find ways into the roots creating blockages.  As more and more roots enter the pipes, there is nowhere for the water to go, so you have a water backup.

Aging sewer systems also play a role in sewer water backups.  With the sewer systems in the United States being on average over 35 years old, this means that there are sewer lines that are potentially upwards of 50-60 years old.  This leads to clogs and simple breakdowns from time resulting in waste and sewer water backup. Combined pipes become an issue when the pipes are responsible for removing both sewer and rainwater.  The lines might become overloaded and backup as a result.  It is always best to stay away from combined pipes if you are able.

Where does sewer water backup?  The short answer is that it backs up in the lowest point in the house.  This is usually the basement, and from experience, it can be a difficult and messy cleanup. How do you keep the drains open?  One of the best ways to keep the lines open is to have an annual inspection of the lines by a company that can assess the quality of the lines and clear blockages if necessary.  This will keep your lines running smoothly, cleanly and most importantly quickly into the municipal water system.

Most importantly, be careful what you are putting down your drains and toilets.  Remember that just because it goes down the kitchen drain or goes down the toilet that it is magically out of your life.  Items and sludge can accumulate in the drain and pipes which over time will create back ups.  Be smart with what goes down the pipes.

Call Water Damage Zone today (877) 520.1923  your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

  • 24/7 Emergency Response, Water Extraction, Water Damage
  • Direct Billing to Insurance, Locally Owned and Operated
  • Water Cleanup, Water Dry outs, Visual Mold Inspections, Sewage Damage Cleanup
  • Sterilizing & Odor Removal, Licensed & Bonded #963976, Reputable Los Angeles based company
  • Image from depositphotos, ID 15892692
  • Shutterstock Sequence Number: US-041C159DA-1

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

 

Dry Rot Tips and Prevention

IMG_0922

 

It is likely that you have encountered wood outside that has been the victim of dry rot. Dry rot is the result of wood that has been infected with a fungus. It starts by digesting things in the wood that give it structure and support. The wood tends to be drier and you will notice it is lighter if you pick it up.

Causes of Dry Rot

One of the first things that happens in the development of dry rot is that the wood comes into contact with moisture. While the wood is wet the fungus will begin to grow inside of it. Dry rot fungus will continue to eat away at wood until it disintegrates.

Appearance

Many people confuse the appearance of dry rot with that of carpenter ant or termite damage. The major difference here is that ants and termites will remove the wood to specifically form areas where they live. If you definitely have termites, you will notice that your wood has termites inside of it and eggs or termite droppings outside of holes in the wood.

 

IMG_1774

Prevention

One of the best ways you can stop dry rot from happening in your home is by stopping excess moisture. You can do this in many ways such as fixing leaky plumbing or a hole that is allowing water to contact the wood in your home. If the wood is contacting soil it has an increased chance of becoming wet and growing the fungus.

Treating Wood

Many times it is inevitable that water will come into contact with wood. These wooden areas should be treated so that fungus cannot grow in them. Borate is a commonly used fungicide that will help prevent dry rot in the wood on your home. It can also be used to prevent insects from infesting the wood. Wood can be treated whenever you like and should be done regularly to increase its effectiveness.

Wood Restoration

If dry rot has gotten the best of your home and you can’t simply treat the wood to solve the problem, you will need to replace the damaged areas. Damaged wood can be replaced by companies like Water Damage Zone who are experienced at restoring homes from water damage. Wooden areas commonly need to be replaced after excessive damage has occurred. Professionals will help you restore your home if you are dealing with large amounts of dry rot.

 

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

How to Stop an Overflowing Toilet

toilet clog

 

Seeing a toilet begin to overflow is often like watching a car crash. You know it’s coming, but there’s not much you can do to stop it. Toilet overflows can be stopped if you act quickly and follow these steps:

1. Switch the water supply off to the toilet as quickly as possible. It is a metal valve that is usually located near the bottom side of the bowl. Turn it counterclockwise to shut it off. This will prevent the toilet from having the water that it needs to keep overflowing.

2. Take the top off from the tank on the back of the toilet. Lift the float ball high so that the water stops running. Now all the water should be off so that you can begin to figure out what you need to do to fix your toilet.

3. Grab a plunger and apply it to the hole inside of the toilet bowl. It should be covering the entire hole completely. Continue to pump the toilet, increasing in power as you work. This should dislodge difficult clogs and allow water to pass through your pipes.

4. Also, if the issue is with the float mechanism in the tank of the toilet, it can be adjusted to be lower in the tank. This will prevent the tank of your toilet from overflowing. Check to make sure that the chain on the float mechanism isn’t caught on anything.

5. If this problem persists or becomes unmanageable, call a plumber or water damage professionals like Water Damage Zone to fix your overflowing toilet.

By catching a toilet overflow early and fixing it, you can prevent yourself from dealing with worse problems in the future. If your pipes become heavily clogged, it can often be impossible to clear all of the debris from them. Professionals have the expertise needed to effectively and completely restore your toilet to its original condition.

 

 

 

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Preventing Mold in Drainpipes

Water Remediation water damage zone

 

Mold in your drainpipes is one of the major causes of odors in the home. Food that you dispose of ends up caught in the pipes sometimes, allowing mold and bacteria to begin to grow. It is important that you know how to deal with this problem before it becomes a bigger one.

Clearing Out the Drain

Drains can be fixed by running various liquids and cleaners through them. First you should start with baking soda, ice, vinegar, or hot water. These substances will help to destroy any mold and bacteria that have begun to form in your drains. If your pipes are plastic, then you will need to be careful with what you pour down them. Don’t use harsh chemicals or overly hot water that could melt them.

Calling a Plumber

If the situation is difficult and you are unable to easily fix it, you may need to call a plumber. Water Damage Zone has the same experience as a plumber, we’re able to solve your mold issue once and for all and fix your clogged pipes. By keeping your sink clean, you will ensure that mold does not begin to form in your drainpipes from rotten food. If you notice that your drains are not working, call professionals to fix the problem before mold has time to form.

 

Sewage Damage

Clean it Out

Just like anything else in the home, drainpipes need to be cleaned from time to time using products that are designed to kill mold. Keeping your pipes open also allows them to dry out so that it is harder for mold to start to form. Scrub and use cleaner on as much of the drain as you can in order to remove mold. Getting a brush that slides down into the drain will also help you to clean it out better.

Utilizing Neighborhood Resources

It is important to get local companies that specialize in home restoration involved in dealing with your drains if they are constantly clogged and forming mold. Even if it’s not a bad situation they will be able to give you a clearer picture of what’s going on with your drain. If something needs to be done, they can quickly fix it or suggest the best way for you to deal with it. If you are experiencing major problems with mold in your pipes it is best to have professionals deal with it instead of risking more damage to your home and health.

Have you ever had mold growing in your pipes? What did you do to get rid of it? Let us know in the comments below.

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

How Common is Shower Mold?

Disgusting hotel shower bathroom tile sealant with mould and mildew

Shower mold is common and is inevitable in showers that don’t get cleaned frequently. Showers are constantly encountering debris that provide mold with the necessary conditions for growth. All of its heat and moisture makes the shower the perfect place for mold to start growing in your home.

Important Equipment

You need to make sure that your bathroom either has a ventilation or exhaust fan to allow air to circulate in the room. This removes excess moisture and allows the bathroom to dry quickly. Air circulation is something that needs to happen if you are going to prevent mold from beginning to grow in your shower.

Mold Spreads Quickly

Small patches of mold that have been ignored for long periods of time will spread and turn into a bigger problem for home owners. It will contaminate your walls, floors and move behind and underneath them as well. When mold is hidden it can remain undetected for long periods of time, allowing it to continue to grow unnoticed.

Visual Mold Damage

Calling Professionals

Professional mold and water damage companies such as Water Damage Zone are valuable assets in the prevention of mold growth in your bathroom. By calling such companies you can have the proper technology installed to allow proper air circulation so mold doesn’t grow. They will inspect your home and determine the proper course of action.

Preventing Bathroom Mold

Use the ventilation fan in your bathroom whenever someone has a shower or bath and leave it on for 30 minutes afterwards. If you don’t have an exhaust fan you should look into getting one installed to properly circulate the air in your bathroom. Use a shower curtain that is resistant to mold that can be washed frequently. Don’t keep lots of products in your shower, they provide hiding places for mold to grow. Wash rugs in your bathroom routinely. By following these precautions, you can avoid the growth of mold in your bathroom.

IMG_6733

 

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411