Baby Floods the House

Water Damage Zone wishes to share this information with the community, we do not own any rights to this video.

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Carpets Harbor Mold

Water Damage

If you’ve read any of our other blogs you know how vile mold can be and how difficult it is to remove completely from your home. Mold is usually found on the backing of carpets where people don’t see it until it has become too big of a problem to handle on their own. Moisture in your carpet is only part of the problem. This article will help you understand the other ways in which carpets provide a safe haven for mold.

How Does Mold Grow in Carpeting

Studies have been down that give us a better picture of how mold actually develops inside of carpets in our homes. What these studies found is that the amount of moisture doesn’t have as big of an impact on mold growth in carpets. The thing that really creates big problems with mold is dirt becoming trapped inside of the carpet. The dirtier the carpets are, the more likely they are to begin growing and spreading mold around your home.

Clean Carpets

Keeping your carpeting clean will help you greatly in reducing the chances of mold developing in your home. Even carpeting that is exposed to humidity will not develop mold as long as it is clean. This means that you must keep your carpets clean all the time so that mold isn’t allowed to begin to grow. Dirt will attract moisture and soak it up, thus allowing any mold spores the nutrients they need to begin to grow.

Preventing Carpet Mold

It’s a good idea to research the ways in which you can prevent mold from growing in your carpets. One of the easiest ways is to not put carpet in areas with a lot of foot traffic because these areas will develop the most dirt and moisture. These two factors are all a carpet needs in order to become a center for mold growth in your own home. Make sure that you keep the humidity down low in your home, that way moisture won’t build up as much in the dirt that is in your carpets. Finally, the best way to prevent mold growth in your carpet is to vacuum it consistently at least twice a week so that dirt doesn’t have the chance to build up in your home.

Don’t wait for mold to become a problem, but if it does always be aware of home restoration companies like Water Damage Zone, who are certified in mold remediation and can help prevent your home from becoming a breeding ground for mold.

 

Call Water Damage Zone today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Indoor Air Contaminated by Floodwater

87718510

If your home floods the first thing you’re going to be doing is getting all the water out of your home. The thing that you may not think about is how polluted the air is inside of the house. If contaminated materials aren’t removed from the area, then moisture will continue to cause problems.

Standing Water

If water is left alone for any period it can begin to breed bacteria and mold. These pollutants don’t stay confined to the water either. Once they have started to grow in the water they will be released into the air around the water. This can leave individuals with symptoms anywhere from allergic reactions to infectious diseases.

Health Concerns

Microorganisms in the water can become released into the air and cause illness. Also, high humidity and moisture will allow mold to begin to grow and spread. Dust mites may appear in the home as well. The air in the home should be cleansed as soon as possible so that health complications don’t begin to arise in those living in the home.

Removing Water ASAP

The water in your home should be cleared and removed immediately so that bacteria and mold aren’t allowed to form and become airborne. If the water is dirty or the damage is extensive, don’t hesitate to contact professionals like Water Damage Zone. It is unsafe to touch any of the pollution and our professionals have the equipment and training to professionally and quickly remove the water from your home. Time is of the utmost importance in this case, the sooner you remove the water, the less likely you are to encounter health problems.

 

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Important: How to Dry Your Home Fast After a Flood

Flood defences
Flooding is a common scenario that most homeowners encounter from time to time. It is important to remember that you need to act fast when a home begins to flood so that the situation doesn’t get out of hand. This means to clear any drains and gutters so that water can flow where it’s supposed to go instead of in your home.

Air Circulation

The first most important thing to do after a flood is open all the windows in the home. Open all doors, closets, and drawers and allow things to dry out. If the electricity has been safely restored to the home, you can use fans to circulate the air in and out of the home. By using a dehumidifier, you can also speed up the drying process if it’s too humid outside to open the windows.

Sump Pump

You can rent a sump pump or buy one to have in your home all the time. What the sump pump does is stay below the water level in your basement and works to constantly push water out of your home. This will help you to quickly remove excess water from your home. A shop vacuum that can handle wet and dry materials should be used to suck water out of any carpeting.

Water DamageAbsorbing Moisture

You can buy certain products that will help to remove moisture from rooms and objects in your home. Some of these are: clay, silica gel, and calcium oxide. These will work to remove any moisture out of the air. Place them inside of closets or drawers to remove the moisture. You can also place them inside of airtight containers with your wet items to suck the moisture out of them.

Call Us

Remember to call a professional like Water Damage Zone if you ever have water damage occur to your home. We have all of the equipment and professionals, stay open 24/7, and are certified in properly repairing water damaged homes. If you feel like the situation is out of your control give us a call and we’ll save the day for you.

 

 

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Your Carpet and Mold

 

Water Damage

Carpet in our homes provide us with something comfortable to walk on and can help to bring a room together. However, when carpets are left uncleaned and neglected for long periods of time, they begin to develop mold. Carpet mold is a complicated and difficult to resolve issue that can cost you countless hours and dollars spent on cleaning products that don’t work.

Allergens

Many types of mold produce allergens that can cause severe reactions in those who are living in the home. By inhaling or touching mold, you are exposing yourself to its negative side effects. Symptoms of mold exposure include:

Itchy eyes
Sneezing
Runny Nose
Red Eyes
Skin Rash
Asthma Attack

Carpet is a High Risk Material for Mold Growth

Carpet is one of the easiest materials for mold to grow in. Carpeting readily houses all the key elements that mold needs to grow: moisture, organic material, oxygen, and a porous surface. Carpets should be vacuumed often and steam cleaned at regular intervals to ensure that mold is not allowed to grow. Many times you will not see mold on your carpet at all, this is because it is growing underneath of it.

Removing Mold from Carpet

Unfortunately, by the time you have discovered mold growth in your carpet this usually means that it is beyond the point of repair. If a large area of the carpet has been affected by mold growth, then it will need to be replaced. If you are dealing with a large amount of mold, it is best to call a company like Water Damage Zone with professional tools and staff who will inspect every inch of your carpet to determine the best way to restore your home to its original condition.

Don’t Hesitate to Call Professionals

Calling Water Damage Zone will ensure that the right measures are taken to protect the health of you and your family. Cleaning up mold is something that we specialize in and make sure to take extra care so that your home is completely restored and enjoyable again. By using commercial-grade cleaning equipment we make sure your home is completely free of any spores before we replace the carpet. This way you can be sure that mold will not start to grow on your fresh carpeting.

 

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

Finding a Professional Mold Remediation Company

Whenever you are facing a mold problem it is good to bring professionals in to determine the best course of action. Unfortunately, some companies aren’t as qualified as others and won’t do as good of a job. The best way to ensure that this doesn’t happen is to do some research on the mold removal company you’re thinking about hiring.

Mold remediation protective equipment

What Certifications Does the Company Have?

Look up the certifications of the company online or call and ask them to provide you with the documentation. Look up each certification online and see what it is for. This will help you understand how qualified the business is to deal with your situation.

How Many Inspections Have They Performed?

Ask the company how many inspections they’ve performed in the past year. This should give you a good estimate of how much of an expert they are when it comes to dealing with mold. The number should be in the hundreds if it’s a small company, even more if it’s larger.

Cost and Conditions11071075_701482796640822_4895054905684283633_n

Make sure that all of the conditions that you agree to with the company are met before you give them the whole payment. Some companies may require partial payment up front, it is important to be careful of companies who ask you to pay the full amount right away. Make sure that all of the mold is completely eliminated and someone has inspected the property after the job is done.

Water Damage Zone

We specialize in mold removal in Southern California and will be able to assist you with any mold problem that you may encounter. We have years of experience dealing with mold remediation and only hire trained professionals that know how to expertly remove mold from your property once and for all. Don’t trust just any company with your home and personal belongings; trust professionals like Water Damage Zone.

 

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411

The Growth of Mold in Cars

Mold. It grows in your basement, kitchen, and bathroom; you may not expect it to also grow in your car. When it begins to grow in your car it can cause all of the same problems for your health that it does when it grows in your home. If you believe that mold is growing in your car, then there are several things that you can do to figure out where it is coming from.

Look for Moisture

Whenever there is mold, there is moisture. By figuring out where the moisture is coming from you can begin to diagnose the mold problem in your car. Moisture can find its way into cars in many different ways. When you find any wetness, dry it immediately so that it won’t create further problems. Use cleaners to remove any mold from the car and also fix any broken parts that are allowing moisture into the care.

Cleaning Your Car

When you clean your car it is important to make sure that it gets dried completely when you’re done. Make sure to leave windows cracked to allow moisture to leave the car. If it’s warm outside, then making sure that the moisture is gone is even more important. The heat and moisture will cause humidity inside of the car that allows mold to grow even more quickly than it normally would.

Mouldy fabric

Transporting Moldy Materials

It is important to note that you risk getting mold in your car whenever you transport plants, wood, or other outdoor materials. Cleaning your car regularly will prevent these spores from beginning to grow and spread inside. If you know that you’re going to be transporting mold contaminated objects, then it is best to cover the interior of your car with plastic sheets to prevent its spread.

Mold in Air Conditioners

Many have experienced a musty smell coming from the vents in their car. Air conditioners are one of the top sources for mold in cars. It starts by growing in the vents when moisture becomes trapped inside of the ventilation system. The air coming from outside of the car is loaded with mold spores, dust and other pathogens. These become trapped inside of the car and create the necessary conditions for mold growth.

Removing Car Mold

The first thing you need to do in any mold case in a car is to find the cause of the mold and repair it. By doing this you will ensure that moisture doesn’t continue to find its way into your car. Use a HEPA vacuum to clean out your car and also disinfect it with cleaners to completely remove any traces of mold. If this doesn’t work, take your car to a mold removal specialist that has access to the special tools they need in order to completely remove it so that it doesn’t grow back.

 

Call Water Damage Zone, Inc. today (877) 520.1923– your future bills may be a lot smaller, if you follow these simple tips. You can also visit our sister company for further information on restoration services at Best American Builders.

We specialize in the following services:

Water Damage Zone, Inc.
Corporate Office
15115 Califa St. Ste. C
Van Nuys, CA 91411